Call: 0123456789 | Email: info@example.com

Finding Ways To Keep Up With Services


Tips to Refinishing Hardwood Floors.

There are many reasons as to why you should use hardwood flooring materials for your floor but also there is a responsibility that comes with the benefits. Like any other material, hardwood can wear out, therefore, meaning you will need sometimes to either replace or refinish them to their former glory. However, you have to define if you need to replace the hardwood flooring materials or the furnish them to restore them to their former glory. When you want to refinish the hardwood floor, you can engage professionals but also it is simple, you can do-it-yourself. Given in this article are some steps you can follow when refinishing hardwood floors.

When it comes to refinishing the hardwood floor, you will need to have the appropriate materials that will be used in this process.There are many materials you need to purchase which can include an oil-based stain, shop rags, shop vac, sandpaper, stain application pads to name but a few. It is possible you don’t understand much about different refinishing materials to purchase, and that is where you can engage a professional for advice. After getting the materials, you now prepare the floor which can include removing carpet tacks, nails, and other objects.

The next step to take is to sand the floor using 60 grit sandpaper and the belt sander. Also, repeat the same with different sandpapers of which you finish with the shop vac to get rid of the debris and dust.

The step that will follow flow sanding will be water popping. What water popping means is the process of getting the floor wet to help in raising the grain. Primarily, water popping is willing to help in helping the wood absorb more of the stains. You need to therefore so dip the rag in the water of which is use it after wants to wipe the floor.

After we are done with the water popping, you need to stain the floor using oil-based stains of which you use the stain applicator pads. There is a procedure to follow when applying the oil-based stains because, after the first application, you should give it 24 to 48 hours to dry. After the first coating has dried up, you should apply polyurethane using the foam roller of which it takes two hours.

Now after you are done with the coating, it is time you start the buffing using the 220-grit screen. After buffing, you should wipe the floor so that you can apply the second coating using polyurethane of what you should repeat this same process for 3-4 times. After you’re done with this process, your floor will be a brand-new. You can discover more on how to maintain hardwood floors after refinishing them because there is a lot of info on the Internet where you can read more about hardwood floors.

Supporting reference: pop over to these guys